Motorhome Mud Flaps and RV Mudflaps  Custom Designed by Duraflap

DURAFLAP makes Custom designed mud flaps for Motorhomes
Mudflaps come With a 14 gauge Galvanized Backing plate with a reinforcement bend to give extra strength and protection against road hazards, and for use as a drag lip while going up steep inclines.
Custom designs are cut into 14 gauge stainless steel.
Your choice of Mirror quality shine or brushed satin finish for an additional $15.
Your stainless steel weight can have whatever design you want cut into it.
The mudflap is cut from 3/8” thick Double reinforced rubber. We use curved corners instead of straight corners, reducing the tearing that may occur at sharp corners.
You tell us what you want, and we will design it. If you have a logo or artwork you want to use, send it to us, and we will get it ready for cutting.

will vary from coach to coach.

Prices depend on the height requirements of the mud flap, and the extent of the artwork design in the Stainless Steel weight.

Prices for the 3/8" double reinforced rubber start at $160 for up to a 12" height. Add an additional $15 for each additional inch of height.

Prices for the mudflap and hardware Without the Stainless steel weight Range from $230 - $300

Prices for Stainless Steel weight, and Galvanized backing plate range from $260 - $390

Complete mudflaps range from $490 - $760

Shipping starts at







DuraFlap LLC also makes custom sized mudflaps to fit inside your fenderwell. These provide protection for both your tow vehicle, and the underside of your motorhome. We recommend that your mud flaps in the fenderwell be within 6" of the ground to give maximum protection. These mud flaps are your first line of defense against rocks. They will stop the majority of rocks where they start.

 Custom Artwork Available for your Motor home

Click Image To Enlarge Click Image To Enlarge
Click Image To Enlarge Click Image To Enlarge 

To measure for your mudflap:

1. Park on level ground and set your R.V. motor home to the height for driving.

2. Find the hanging point for your R.V. mud flap.
Each R.V. motor home model is different, and we rely on you to find points that the mudflap may hang from.  Many R.V.s have empty holes along the frame to attach our supplied eye bolts to for hanging. Some require you to drill holes for installation. If this is necessary, most RV repair companies can do this for you. Some R.V. coach tow hitches are wide enough to have hanging spots on them or a simple place to drill a hole thru.

3. Measure from the hanging point to the ground.  Subtract 8 inches. This is the normal height you want your mudflap to be.
This will leave approximately 3-4 inches for the swing and 4-5" inches between the mud flap and the ground.
4. Be aware of other obstacles that the mud flap may have to hang below. If these obstacles hang more than 4" below the hanging points, you want to measure and design cut outs around the obstacles, making sure your mud flap will hang no closer than 4" to the ground. Any closer and your mud flap may hit the ground on uneven surfaces and kick rocks up toward your tow vehicle.  These obstacles may influence the 8” subtraction described above.  
Most mud flaps are 95" across and 10 - 12" tall.  The average cut out is 2-3" deep and 36 - 46" across. The circular dashed lines are for cut outs around rear exhaust pipes. You will not want your mud flap to hang behind the exhaust pipe. The rubber can melt.
Samples of custom cut-outs

Use this template to measure the layout of your mud flap when a cut out is required.

To measure the spread for the hanging apparatus:
Find the center of your coach.

Measure from one hanging point to the other. These hanging points will be equal distance from the center.  This is the spread.

Our hanging bracket is pre-drilled with several mounting holes to allow you to change hanging points or move the mud flap
to a new coach in the future, as long as the length of the mud flap will fit.
ALFA hanging point

Holiday Rambler hanging point

Revolution hanging point

Pace Arrow hanging point

Typical Hanger

Customer Service and Returns
DuraFlap LLC motor home products carry a 30-day money back guarantee (less shipping/handling and 20% restocking fee) on all stock items purchased and returned in new condition (excluding custom order stainless steel weights and custom sized rubber). The customer is responsible for measuring and obtaining the size specifications. See above for measuring instructions. All returns must have a return authorization number.
Please call for a return authorization number: 541-245-9148

Order Shipment
OEM mud flaps are usually shipped within 5-7 business days. Custom made mud flaps may take 4-5 weeks to design and create.
If you are on the road, we are able to ship to a destination of your choice, or have the mud flaps on hold for you at a UPS station along your path. You will receive an email when your order is shipped.

Warranty Information
DuraFlap LLC motor home products carry a limited 1-year warranty against manufacturers' defects. This warranty does not cover tears or breaks sustained due to impact or dragging. All warranty returns require a return authorization number.
To obtain a return authorization number, please call (541) 582-6699

We specialize in custom Motorhome mudflaps for motorhomes and mud flaps for RVs, mudflap accessories, custom RV mud flap design by DuraFlap LLC, motor home splash guards, mudflaps for recreational vehicles, custom motorhomes
Site by Rogue Web


Motorhome mud flaps custom designed for motorhomes and mudflaps for RVs, mudflap accessories, custom RV mud flap design by DuraFlap LLC, motor home splash guards, trailers, mudflaps for recreational vehicles, custom motorhomes mud flaps, large RV's, motor homes, Monaco, Bounder, Pace Arrow, Winnebago, Revolution, RV trailer and more.